{"title":"HPA Conversion Kit's","description":"","products":[{"product_id":"umarex-readyair-portable-oilless-electric-hpa-compressor","title":"UMAREX READYAIR PORTABLE OILLESS ELECTRIC HPA COMPRESSOR!","description":"\u003cspan style='color: rgb(34, 34, 34); font-family: proxima-nova, \"Helvetica Neue\", Helvetica, Helvetica, Arial, sans-serif;'\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cb\u003ePre-Charged Pneumatic airguns are gaining in popularity like never before. The portable Umarex ReadyAir electronic compressor now stands at the ready to reliably get your air tank back up to pressure for more shooting. The ReadyAir is a high pressure air pump that doesn't need oil or a liquid filled radiator for cooling. The advanced design of this pump means there's less for you to worry about when filling. Just connect the power, set the digital control module for the pressure you require, and make the appropriate connections. Automatic overheating protection circuitry protects your investment so you'll keep enjoying fill after fill instead of worrying. Filling the Umarex Gauntlet's 13 cubic inch tank from zero to 3000 PSI takes only 7 minutes. Top-offs are made in about 4 minutes. Filling the Umarex Hammer takes approximately 26 minutes. Larger tanks will require more fill time, but with the peace of mind that the auto heat protection offers, you can fill as needed without worry. The ReadyAir can handle fills up to 4,500 PSI to keep hard hitting big bore's and air archery rifles like the Umarex AirSaber flinging arrows with authority.\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"color: rgb(34, 34, 34);\"\u003eAC\/DC Operation (12V\/110V)\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: rgb(34, 34, 34);\"\u003e\u003c\/span\u003e\u003cspan style=\"color: rgb(34, 34, 34); letter-spacing: 0px; background-color: initial;\"\u003eOilless Design (no need to add oil)\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: rgb(34, 34, 34); letter-spacing: 0px; background-color: initial;\"\u003e\u003c\/span\u003e\u003cspan style=\"color: rgb(34, 34, 34); letter-spacing: 0px; background-color: initial;\"\u003eProgramable Digital Readout\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: rgb(34, 34, 34); letter-spacing: 0px; background-color: initial;\"\u003e\u003c\/span\u003e\u003cspan style=\"color: rgb(34, 34, 34); letter-spacing: 0px; background-color: initial;\"\u003e4,500 PSI Output\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: rgb(34, 34, 34); letter-spacing: 0px; background-color: initial;\"\u003e\u003c\/span\u003e\u003cspan style=\"color: rgb(34, 34, 34); letter-spacing: 0px; background-color: initial;\"\u003eAuto Heat Protection Circuitry\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: rgb(34, 34, 34); letter-spacing: 0px; background-color: initial;\"\u003e\u003c\/span\u003e\u003cspan style=\"color: rgb(34, 34, 34); letter-spacing: 0px; background-color: initial;\"\u003eFan Cooled\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: rgb(34, 34, 34); letter-spacing: 0px; background-color: initial;\"\u003e\u003c\/span\u003e\u003cspan style=\"color: rgb(34, 34, 34); letter-spacing: 0px; background-color: initial;\"\u003eFill 13 Cubic Inch Tank from 0 to 3000 PSI in approx. 7 minutes\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: rgb(34, 34, 34); letter-spacing: 0px; background-color: initial;\"\u003e\u003c\/span\u003e\u003cspan style=\"color: rgb(34, 34, 34); letter-spacing: 0px; background-color: initial;\"\u003eDC Alligator Cables included\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: rgb(34, 34, 34); letter-spacing: 0px; background-color: initial;\"\u003e\u003c\/span\u003e\u003cspan style=\"color: rgb(34, 34, 34); letter-spacing: 0px; background-color: initial;\"\u003e18 Inch Fill Hose with Fittings Included\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: rgb(34, 34, 34); letter-spacing: 0px; background-color: initial;\"\u003e\u003c\/span\u003e\u003cspan style=\"color: rgb(34, 34, 34); letter-spacing: 0px; background-color: initial;\"\u003eSturdy carry handle and rubber feet\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: rgb(34, 34, 34); letter-spacing: 0px; background-color: initial;\"\u003e\u003c\/span\u003e\u003cspan style=\"color: rgb(34, 34, 34); letter-spacing: 0px; background-color: initial;\"\u003e26 lbs. in weight\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HotSpotAirsoft","offers":[{"title":"Default Title","offer_id":39689723510952,"sku":"2211283","price":649.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/3154\/3208\/products\/2211283-2.jpg?v=1618551049"},{"product_id":"polarstar-f2-v2-hpa-conv-kit-w-full-size-rev3-fcu-free-lipo-battery-pre-order","title":"Polarstar F2 V2 V2 \/ M4 M16 HPA Conv. Kit W-FULL SIZE REV3 FCU \u0026 FREE LiPo Battery","description":"\u003ch2 style=\"box-sizing: border-box; font-family: Roboto, sans-serif; font-weight: 400; line-height: 1.1; margin-top: 20px; color: #34495e; background-color: #f5f5f5;\"\u003e\u003c\/h2\u003e\n\u003ch2 style=\"box-sizing: border-box; margin-top: 20px; font-family: Roboto, sans-serif; font-weight: 400; line-height: 1.1; background-color: #f5f5f5; color: #34495e;\"\u003e\u003cspan style=\"font-family: Roboto, sans-serif;\"\u003ePatented Dual Solenoid Design\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch4 style=\"box-sizing: border-box; margin-top: 10px; line-height: 1.1; font-family: Roboto, sans-serif; background-color: #f5f5f5; color: #34495e;\"\u003e\u003cspan style=\"font-size: 18px;\"\u003eIncreased Efficiency\u003c\/span\u003e\u003c\/h4\u003e\n\u003ch4 style=\"box-sizing: border-box; font-family: Roboto, sans-serif; font-weight: 400; line-height: 1.1; margin-top: 10px; color: #34495e; background-color: #f5f5f5;\"\u003e\u003c\/h4\u003e\n\u003cp style=\"box-sizing: border-box; letter-spacing: normal; font-family: Roboto, sans-serif; background-color: #f5f5f5;\"\u003e\u003cspan style=\"font-size: 16px;\"\u003eThe F2™ incorporates a new one-piece, lightweight poppet valve design yet still operates on the same principle as the Fusion Engine™ poppet. This valve is able to operate at lower pressures and uses less air volume to function which optimizes air efficiency.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"box-sizing: border-box; letter-spacing: normal; font-family: Roboto, sans-serif; background-color: #f5f5f5;\"\u003e\u003cspan style=\"font-size: 16px;\"\u003eThe standard F2 poppet is equivilent to the Red Low-Flow poppet of the Fusion Engine.\u003c\/span\u003e\u003c\/p\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e\u003cspan style=\"font-family: Roboto, sans-serif;\"\u003eThe F2™ nozzle is spring biased forward which provides a consistent loading force regardless of operating pressure. It shares the same spring as the Fusion Engine™ with both light and heavy spring options available to adjust the loading force.\u003c\/span\u003eSpring Loaded Nozzle\u003c\/span\u003e\n\u003cp style=\"box-sizing: border-box; color: #34495e; font-family: Roboto, sans-serif; letter-spacing: normal; background-color: #f5f5f5;\"\u003e\u003cspan style=\"font-size: 16px;\"\u003eThe robust design of the F2™ allows for an operating pressure range of 45psi to 145psi which enables it to achieve velocities from CQB to DMR while employing only one nozzle for the entire velocity adjustment range.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv id=\"ds_div\"\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cbr\u003e","brand":"HotSpotAirsoft","offers":[{"title":"Default Title","offer_id":39690080780456,"sku":"N9-7C3D-NC9N","price":441.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/3154\/3208\/products\/F2V2-M4-2.jpg?v=1618556136"},{"product_id":"polarstar-f1-hpa-conversion-for-m4-m16-w-rev3-fcu","title":"Polarstar F1 HPA Conversion For M4-M16 w- REV3 FCU","description":"\u003cbr\u003eWhat is the F1? Like the Fusion Engine and JACK, the patent pending F1 is a high performance HPA (High Pressure Air) system which replaces the traditional piston and gears of an AEG with a programmable pneumatic system. Flow Control The unique flow control system uses an integral check valve to regulate the forward speed of the nozzle while maintaining the fastest retract speed possible. This system is also what makes the F1's \"2-stage\" firing possible. When the nozzle is traveling in the forward direction the check valve is sealed, limiting the speed of the nozzle for greater consistency. When the nozzle reaches the forward position the check valve opens to allow the maximum flow into the barrel. The additional flow is maintained throughout the rearward travel of the nozzle, allowing it to retract without limiting the speed. Compact and Efficient The F1 uses a custom solenoid designed by PolarStar and manufactured by MAC Valves. The design allows the solenoid to become an integral part of the system and not simply a a switch to control gas flow. This not only makes the F1 more compact but also minimizes the dead volume inside of the system, increasing efficiency and decreasing response time. Offset Nozzles The F1 is compatible with virtually every AEG gearbox, including those with offset nozzles by using either a centerline or offset front cylinder. The front cylinders are interchangable and a centerline F1 may be converted to an offset F1 by simply swapping the front cylinder and nozzle. Cross-Compatible Electronics All PolarStar single-solenoid systems (JACK and F1) use the same electronics, making the F1 compatible with any kit already available for JACK. Some of the switchboards that are already available or coming soon include: Version 2 Version 3 ARES Amoeba Elite Force HK417 Elite Force Tavor (S\u0026amp;T) ARES V2\/V3 TM M14 G\u0026amp;G M14 Plugboards for machine guns or custom installs.\u003cbr\u003eNow Comes w\/ Upgraded REV3 FCU \u003cbr\u003e\u003cbr\u003e","brand":"HotSpotAirsoft","offers":[{"title":"Default Title","offer_id":39690340171944,"sku":"POL-F1","price":394.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/3154\/3208\/products\/POL-F1-2T.jpg?v=1618560018"},{"product_id":"polarstar-jack-hpa-version-2-conversion-kit-for-m4-m16-w-rev3-fcu","title":"Polarstar JACK HPA Version 2 Conversion Kit for M4-M16 w- REV3 FCU","description":"Description: Polarstar JACK HPA Version 2 Conversion Kit for M4\/M16\n\nThe JACK™ system was designed to answer the demand for an affordable, high performance HPA (High Pressure Air) conversion for AEG's. The system is a drop-in cylinder replacement that is universally compatible with a wide range of gearbox versions that have center-line nozzles.\n\nSimilar to its sister product, the F1, it replaces the original gearbox components with a programmable pneumatic system allowing for higher performance and greater reliability over a gear driven system. Although economically priced, JACK™ still retains the same performance and quality you have come to expect from PolarStar products\n\nJust like all other PolarStar HPA conversions, JACK™ also allows for easy velocity adjustment. Using a standard M4 as an example, velocity can be adjusted from below 280fps and up to approximately 500fps with a .20g BB. This can be done simply by adjusting input pressure and poppet dwell to fine tune your rifles velocity in increments of just a few FPS at a time. Maximum velocity potential of the system will vary depending upon the barrels length and tightness of the bore. Longer and tighter barrels will yield a higher velocity while shorter or wider barrels will be yield a lower velocity.  \n\nFor Example:\n\n@130 PSI with a 363mm (14 in)- 500 Feet Per Second\n@130 PSI with a 300mm (10 in)- 450 Feet Per Second\n\nSpecifications:\nManufacturer: PolarStar Airsoft\nModel: JACK\nMuzzle Velocity: 280 - 500 FPS, Adjustable\nRate of Fire: 1 - 30+ RPS, Adjustable\nFire Modes: Semi, 2-9rd Burst \/ Semi, Full Auto \/ Semi Only\nPSI Operating Range: 40 - 130 PSI\nFCU Voltage Range: 7-10 VDC\nPackage Includes: JACK, Internal Switch Board, REV3 FCU\u003cbr\u003e","brand":"HotSpotAirsoft","offers":[{"title":"Default Title","offer_id":39690402201768,"sku":"F8-0LZG-EZG5","price":347.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/3154\/3208\/products\/SJV2-M4-2.jpg?v=1618560881"},{"product_id":"polarstar-jack-hpa-version-3-conversion-kit-w-rev3-fcu","title":"Polarstar JACK HPA Version 3 Conversion Kit w- REV3 FCU","description":"Description: Polarstar JACK HPA Version 3 Conversion Kit\n\nThe JACK™ system was designed to answer the demand for an affordable, high performance HPA (High Pressure Air) conversion for AEG's. The system is a drop-in cylinder replacement that is universally compatible with a wide range of gearbox versions that have center-line nozzles.\n\nSimilar to its sister product, the F1, it replaces the original gearbox components with a programmable pneumatic system allowing for higher performance and greater reliability over a gear driven system. Although economically priced, JACK™ still retains the same performance and quality you have come to expect from PolarStar products\n\nJust like all other PolarStar HPA conversions, JACK™ also allows for easy velocity adjustment. Using a standard M4 as an example, velocity can be adjusted from below 280fps and up to approximately 500fps with a .20g BB. This can be done simply by adjusting input pressure and poppet dwell to fine tune your rifles velocity in increments of just a few FPS at a time. Maximum velocity potential of the system will vary depending upon the barrels length and tightness of the bore. Longer and tighter barrels will yield a higher velocity while shorter or wider barrels will be yield a lower velocity.  \n\nFor Example:\n\n@130 PSI with a 363mm (14 in)- 500 Feet Per Second\n@130 PSI with a 300mm (10 in)- 450 Feet Per Second\n\nSpecifications:\nManufacturer: PolarStar Airsoft\nModel: JACK\nMuzzle Velocity: 280 - 500 FPS, Adjustable\nRate of Fire: 1 - 30+ RPS, Adjustable\nFire Modes: Semi, 2-9rd Burst \/ Semi, Full Auto \/ Semi Only\nPSI Operating Range: 40 - 130 PSI\nFCU Voltage Range: 7-10 VDC\nPackage Includes: JACK, Internal Switch Board, REV3 FCU\u003cbr\u003e","brand":"HotSpotAirsoft","offers":[{"title":"Default Title","offer_id":39690402300072,"sku":"SJV3","price":352.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/3154\/3208\/products\/SJV3-2.jpg?v=1618560884"},{"product_id":"polarstar-micro-regulator","title":"PolarStar MR \"MicroReg Gen 2\" Micro Regulator Air Rig (Regulator Only)","description":"\u003cspan data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWhen the original Micro Regulator™ came out it was an instant hit since it was ultra compact yet offered the performance of regulators twice its size. With the introduction of the second generation of this regulator, we've simplified manufacturing and ease of maintenance while retaining its compact footprint. With the regulator body coming it at just 0.006\" taller than the original, the Micro Reg™ GEN2 stands a hair over 2.25\" tall which makes the entire regulator more compact than a traditional UFA. Thanks to this streamline, low-profile design it allows tanks to fit more easily into compact packs popular with minimalist loadouts. This is all done without sacrificing performance as well since this tiny regulator has a lightning fast recharge rate that is on par with its larger brother the MRS™. The Micro Reg™ GEN2 now shares the exact same internal components as the UGS™ and CGS™ and only has a total of two o-rings in its entire assembly which further promote reliability. Additionally, the GEN2 now has a two piece body similar to the large MRS™ making it much easier to maintain. \u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable output pressure from 40psi to 130psi (standard configuration).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eOptional High Pressure Spring boots maximum pressure to ~200psi.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eIntegral tournament lock can be secured with a standard zip-tie.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with standard HPA as well as SLP tanks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eHP Spring Not Included*\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hot Spot Airsoft","offers":[{"title":"Default Title","offer_id":41671311982827,"sku":"MICROREG","price":134.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/3154\/3208\/products\/10000069_-_Micro_Reg_GEN2_Reg_Only__86868.1633032564.jpg?v=1634393967"},{"product_id":"polarstar-kythera-sa™-conversion-kit-semi-auto-v2-m4-m16","title":"Polarstar Kythera SA™ Conversion Kit, Semi-Auto, V2, M4\/M16","description":"\u003ch2 style=\"box-sizing: border-box; font-family: Roboto, sans-serif; font-weight: 400; line-height: 1.1; margin-top: 20px; color: #34495e; background-color: #f5f5f5;\"\u003e\u003c\/h2\u003e\n\u003ch2 style=\"box-sizing: border-box; margin-top: 20px; font-family: Roboto, sans-serif; font-weight: 400; line-height: 1.1; background-color: #f5f5f5; color: #34495e;\"\u003e\n\u003cspan\u003eThe Kythera has been the most eagerly anticipated products from PolarStar in the past decade. This HPA system is a radical departure from all previous systems that PolarStar has produced since the Kythera does not use a battery, an FCU or any type of electronics. The Kythera is completely mechanical. This means you never have to worry about charging batteries or work with delicate electronics. It also means that the system is completely waterproof.\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003eThe name \"Kythera\" (ky-the-ra) was derived from the Antikythera Mechanism which is a mysterious device that was discovered by sponge divers off the coast of the Greek island Antikyther. The mechanism was so advanced in design that scientists have been studying it for decades to discover its\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003epurpose.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eThe machine dates from around the end of the 2nd century B.C. and is the most sophisticated mechanism known from the ancient world. Nothing as complex is known for the next thousand years. The Antikythera Mechanism is now understood to be dedicated to astronomical phenomena and operates as a complex mechanical \"computer\" which tracks the cycles of the Solar System.\u003c\/p\u003e\n\u003cp\u003eFor this reason we used the name Kythera for the valve mechanism at the core of a new line of PolarStar mechanical HPA systems. Although it contains very few parts and is easy to install and maintain, the system incorporates a very intelligent design and is unlike anything else on the market. The system was designed as a mechanical system from the ground up and uses a realistic trigger mechanism which can be applied to single-shot, semi-automatic and fully-automatic systems.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe first of these systems is Kythera SA (Semi-Automatic), the semi-auto-only variant for use in AEG gearboxes.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eSo, what makes the Kythera so unique?\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e----\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eRealistic Trigger\u003c\/h2\u003e\n\u003cp\u003eWhat sets this system apart from other mechanical systems is the design of its trigger. The trigger mechanism is designed to replicate the function, weight and feel of a real single-action firearm trigger. It feels real because it is real. The hardened alloy steel sears catch and release the stainless steel spool valve in the same way the sears of a real firearm catch and release the hammer or striker. This gives the Kythera trigger the distinct break and reset you would expect to feel when firing a real single action firearm. The trigger mechanism in the Kythera SA is also adjustable, allowing the user to fine tune the weight and over travel. Additionally, the internal firing valve is balanced and the only force applied during firing is the main spring. This means the function and feel of the trigger is independent of input pressure and velocity.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0023\/7466\/4301\/files\/IMG_2701.jpg?v=1582664307\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch2\u003eComplete Shot Cycle\u003c\/h2\u003e\n\u003cp\u003eThe design of the Kythera SA completes a shot cycle on the trigger pull. This\u003cspan class=\"text_exposed_show\"\u003e\u003cspan\u003e \u003c\/span\u003egives you the proven closed bolt performance of the Fusion Engine and F2 in a completely mechanical, waterproof system with a realistic trigger.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eIt does not require the trigger to be released before the nozzle chambers the next round and the firing volume is refilled. This occurs automatically and consistently every shot, with adjustable nozzle dwell and return speed.\u003c\/p\u003e\n\u003cp\u003eAs the system resets and recharges immediately after firing, it is ready to fire again before the trigger has been released. This means the system can cycle very quickly for faster follow up shots and a lower potential for double feeding.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0023\/7466\/4301\/files\/IMG_2700_c979c70d-7c2b-465e-9423-434c48ca9970.jpg?v=1582664490\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch2\u003eExtremely Efficient and Consistent\u003c\/h2\u003e\n\u003cp\u003eThe valve design of the Kythera operates without the need for air to control the opening or closing of the valve. Without a pilot valve, 100% of the air going into the system is fired through the nozzle allowing it to operate very efficiently. In addition to being extremely efficient, the system is also extremely consistent. The valve is released at the same point every shot with the same force applied, regardless of trigger input.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0023\/7466\/4301\/files\/IMG_2698.jpg?v=1582664360\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch2\u003eUniversal Charging Cord\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe steel cord visible at the back of the system is attached to a cocking mechanism for the internal spool valve.  Although the system automatically cocks the spool valve when the system is pressurized, since the Kythera uses a balanced valve, it is possible in certain situations that the valve could stall and needs to be manually cocked. This typically only happens if the system is run completely out of air so that the pressure drops below the operating range of the system. The cord is designed to be either routed through the grip of the rifle for easy access or even possibly attached in some fashion to the charging handle.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eEasy Installation\u003c\/h2\u003e\n\u003cp\u003eThe Kythera SA system installs into a standard gearbox as a single assembly and typically does not require any modification to the gearbox. There are no separate parts to install and the only parts needing to be retained from the gearbox is the trigger, spring guide, selector and safety components.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eWide Velocity Adjustment Range\u003c\/h2\u003e\n\u003cp\u003eThe Kythera has a wide operating pressure range of 60psi to 180psi which allows you to fine tune the velocity of the system and tailor for different requirements and applications. Within this pressure range we observed a muzzle velocity of 270 - 500fps w\/ .20g using a 6.05x380mm barrel. This lets a single Kythera be used in any role ranging from CQB to Sniper by mainly just adjusting the input pressure from your air rig.\u003c\/p\u003e\n\u003ch2 style=\"box-sizing: border-box; margin-top: 20px; font-family: Roboto, sans-serif; font-weight: 400; line-height: 1.1; background-color: #f5f5f5; color: #34495e;\"\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003cp\u003e----\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned from the ground up as a high performance mechanical HPA system, not a modification of a solenoid operated design.\u003c\/li\u003e\n\u003cli\u003ePatent pending valve mechanism provides excellent efficiency and consistent velocity combined with a realistic trigger pull and reset.\u003c\/li\u003e\n\u003cli\u003eCompletes a full shot cycle on the trigger pull alone which translates into consistent nozzle movement and rapid follow up shots.\u003c\/li\u003e\n\u003cli\u003eAdjustable trigger. Adjustments include: Weight, length of pull and over travel.\u003c\/li\u003e\n\u003cli\u003eAdjustable nozzle dwell\/return speed.\u003c\/li\u003e\n\u003cli\u003eWide operating pressure range of 60 to 180psi.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HotSpotAirsoft","offers":[{"title":"Default Title","offer_id":43173446680811,"sku":"10000774","price":288.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/3154\/3208\/products\/IMG_2698.webp?v=1659453101"},{"product_id":"polarstar-mr-microreg-gen-2-micro-regulator-air-rig-kit-w-42-hose","title":"PolarStar MR \"MicroReg Gen 2\" Micro Regulator Air Rig KIT (W\/42\" Braided Air Line)","description":"\u003cspan data-mce-fragment=\"1\"\u003eWhen the original Micro Regulator™ came out it was an instant hit since it was ultra compact yet offered the performance of regulators twice its size. With the introduction of the second generation of this regulator, we've simplified manufacturing and ease of maintenance while retaining its compact footprint. With the regulator body coming it at just 0.006\" taller than the original, the Micro Reg™ GEN2 stands a hair over 2.25\" tall which makes the entire regulator more compact than a traditional UFA. Thanks to this streamline, low-profile design it allows tanks to fit more easily into compact packs popular with minimalist loadouts. This is all done without sacrificing performance as well since this tiny regulator has a lightning fast recharge rate that is on par with its larger brother the MRS™. The Micro Reg™ GEN2 now shares the exact same internal components as the UGS™ and CGS™ and only has a total of two o-rings in its entire assembly which further promote reliability. Additionally, the GEN2 now has a two piece body similar to the large MRS™ making it much easier to maintain. \u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable output pressure from 40psi to 130psi (standard configuration).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eOptional High Pressure Spring boots maximum pressure to ~200psi.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eIntegral tournament lock can be secured with a standard zip-tie.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with standard HPA as well as SLP tanks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eHP Spring Not Included*\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eThe Air Rig includes the regulator, air line and male QD fitting assembly which is everything required to connect one of our HPA engines to an HPA tank. \u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hot Spot Airsoft","offers":[{"title":"Default Title","offer_id":43405232341227,"sku":"MICROREG-KIT","price":176.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/3154\/3208\/products\/microregkit.jpg?v=1664483832"},{"product_id":"polarstar-jack-hpa-version-2-conversion-kit-for-m4-m16-w-rev3-fcu-1","title":"PolarStar Braided Air Line (42\" Black)- W \/ MALE QD Fitting INCLUDED!","description":"\u003cp\u003eDescription:\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003ePolarStar Braided Air Line (42\" Black)- W \/ Male QD Fitting INCLUDED!\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMade in the USA\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEquipped with foster QD male and female fittings\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HotSpotAirsoft","offers":[{"title":"Default Title","offer_id":43416617550059,"sku":"205C191","price":59.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/3154\/3208\/products\/airline.webp?v=1664814173"},{"product_id":"copy-of-polarstar-mr-microreg-gen-2-micro-regulator-air-rig-kit-w-42-braided-air-line","title":"PolarStar UGS Type 2, HPA (TM SPEC) - R3 Buttstock Included (Thank Sold Separately)","description":"\u003cp\u003e\u003cspan\u003eWith the PolarStar UGS™ (Universal Gas Stock) you can now get the performance advantage of a HPA system without needing to be tethered to a remote air rig and still retain the likeness and function of a traditional adjustable AR-15 stock. It can be used with any of the PolarStar cylinder conversion kits such as the F2™, F1™, JACK™ or Kythera™ and is compact enough that it can also be used with other similar HPA cylinder systems on the market.\u003c\/span\u003e\u003cbr\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0023\/7466\/4301\/files\/UGS_Type_2_1200x500.jpg?v=1553528236\"\u003e\u003cbr\u003e\u003cspan\u003eIts integral regulator shares the same internal design as PolarStar's other compact regulators and delivers performance on par with systems twice its size. This regulator has an output pressure range of 40-130psi which is easily adjusted using a 3\/32 allen key but can be locked out using a standard chrono zip tie which blocks the adjustment screw. Additionally, if you want to get a little more \"omph\" out of the regulator, you can install the High Pressure Spring (p\/n \u003c\/span\u003e\u003ca class=\"text-link\" title=\"Compact Regulator High Pressure Spring\" href=\"https:\/\/polarstarairsoft.com\/collections\/air-systems-parts-assessories\/products\/high-pressure-spring-200psi-micro-reg-ugs-and-cgs\" target=\"_blank\"\u003e10000692\u003c\/a\u003e\u003cspan\u003e)* which boots the maximum output pressure to approximately 200psi.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eYou are able to order the UGS™ in two different configurations. The HPA (2.000\") configuration is designed to accept 13ci HPA tanks and 2.000\" diameter buttstocks such as the included G\u0026amp;P R3 or other 2.000\" stocks made for paintball applications such as those from MCS.\u003c\/p\u003e\n\u003cp\u003eThe CO2 configuration comes with a different rail that allows it to accept our 12g or 33g\u003cspan\u003e \u003c\/span\u003e\u003ca class=\"text-link\" title=\"CO2 Inserts\" href=\"https:\/\/polarstarairsoft.com\/collections\/air-systems\/products\/co2-inserts\"\u003eCO2 Inserts\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003ewhich makes it possible to use traditional Milspec buttstocks. Your choice of a 12g or 33g CO2 insert is included with the CO2 models. The 33g CO2 models accept threaded CO2 cartridges (p\/n \u003ca class=\"text-link\" title=\"10000332\" href=\"https:\/\/polarstarairsoft.com\/collections\/ugs-accessories\/products\/co2-cartridge-33g\" target=\"_blank\"\u003e10000332\u003c\/a\u003e) while the 12g CO2 models use the standard 12g cartridges commonly used for Airsoft and Air Guns. One can configure the same UGS for the use of either the 2.000\" HPA tanks or Milspec CO2 inserts by purchasing the different\u003cspan\u003e \u003c\/span\u003e\u003ca class=\"text-link\" title=\"UGS Stock Rails\" href=\"https:\/\/polarstarairsoft.com\/collections\/air-systems-parts-assessories\/products\/ugs-stock-rail\" target=\"_blank\"\u003eUGS Stock Rails\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eseparately. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0023\/7466\/4301\/files\/UGS_Type_2_Rifle_1200x500.jpg?v=1553528412\"\u003e\u003c\/p\u003e\n\u003cp\u003eAvailable pre-configured for either 2.000\" diameter HPA tanks or our\u003cspan\u003e \u003c\/span\u003e\u003ca class=\"text-link\" title=\"CO2 Inserts\" href=\"https:\/\/polarstarairsoft.com\/collections\/air-systems\/products\/co2-inserts\"\u003eCO2 Inserts\u003c\/a\u003e.\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003eThe\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eHPA\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003econfiguration includes G\u0026amp;P R3 buttstock pictured.\u003c\/p\u003e\n\u003cp\u003eThe\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eCO2\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003econfiguration includes your choice of 12g or 33g CO2 inserts.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003eType 1\u003c\/strong\u003e\u003cspan\u003e is designed for use with M4 series AEG receivers that accept 1-3\/16\"-16 threaded buffer tubes such as the G\u0026amp;P R3 series. This is where the buffer tube itself threads into the receiver. (Modification of the gearbox is required)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eType 2 is\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003edesigned for use with traditional TM Spec M4 series AEG receives. This is where the buffer tube slides onto a stock tail on the back of the receiver and is secured by a bolt. (Modification of the receiver and gearbox is required)\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe UGS regulator can accept up to 900psi allowing for the use of either standard output HPA tanks as well as SLP (SLP recommended).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with all standard 2.000\" diameter HPA tanks and most 2.000\" tank stocks used in paintball applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eSimple zip-tie lockout\/tournament lock.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable length of pull.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eSame internal design as the other compact PolarStar regulators (Micro Reg GEN2, CGS) with cross compatibility between parts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe UGS™ regulator uses only 2 o-rings, promoting reliability and ease of maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eNot compatible with Fusion Engine™.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cb\u003e*HPA Tank, CO2 Cartridges \u0026amp; HP Spring Not Included\u003cbr\u003e\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"container bg-dark text-light\"\u003e\n\u003ctable class=\"table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMin Output Pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e40 PSI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax Output Pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e130 PSI  (~200 PSI with HP Spring, p\/n\u003cspan\u003e \u003c\/span\u003e\u003ca class=\"text-link\" title=\"Compact Regulator High Pressure Spring\" href=\"https:\/\/polarstarairsoft.com\/collections\/air-systems-parts-assessories\/products\/high-pressure-spring-200psi-micro-reg-ugs-and-cgs\" target=\"_blank\"\u003e10000692\u003c\/a\u003e)*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax Input Pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e900 PSI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOutputs\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eInterfaces w\/ Airline (6mm OD x 4mm ID)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWarranty Information\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 Year Limited Warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003ca title=\"UGS User Manual\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0023\/7466\/4301\/files\/UGS_USER_Guide.pdf?v=1556026694\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0023\/7466\/4301\/files\/PStar_Manual_Icon_e15fe2b9-ddbe-484c-ba5c-a1a5a5d52200_100x100.png?v=1583426406\"\u003e\u003c\/a\u003e \u003cbr\u003e\u003c\/p\u003e","brand":"Hot Spot Airsoft","offers":[{"title":"Default Title","offer_id":43977620979947,"sku":"205D010","price":239.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/3154\/3208\/files\/205D010_1_14.jpg?v=1685561955"},{"product_id":"copy-of-polarstar-ugs-type-2-hpa-tm-spec-r3-buttstock-included-thank-sold-separately","title":"PolarStar UGS Type 1, HPA (MIL SPEC RECEIVER) - R3 Buttstock Included (Thank Sold Separately)","description":"\u003cp\u003e\u003cspan\u003eWith the PolarStar UGS™ (Universal Gas Stock) you can now get the performance advantage of a HPA system without needing to be tethered to a remote air rig and still retain the likeness and function of a traditional adjustable AR-15 stock. It can be used with any of the PolarStar cylinder conversion kits such as the F2™, F1™, JACK™ or Kythera™ and is compact enough that it can also be used with other similar HPA cylinder systems on the market.\u003c\/span\u003e\u003cbr\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0023\/7466\/4301\/files\/UGS_Type_2_1200x500.jpg?v=1553528236\"\u003e\u003cbr\u003e\u003cspan\u003eIts integral regulator shares the same internal design as PolarStar's other compact regulators and delivers performance on par with systems twice its size. This regulator has an output pressure range of 40-130psi which is easily adjusted using a 3\/32 allen key but can be locked out using a standard chrono zip tie which blocks the adjustment screw. Additionally, if you want to get a little more \"omph\" out of the regulator, you can install the High Pressure Spring (p\/n \u003c\/span\u003e\u003ca class=\"text-link\" title=\"Compact Regulator High Pressure Spring\" href=\"https:\/\/polarstarairsoft.com\/collections\/air-systems-parts-assessories\/products\/high-pressure-spring-200psi-micro-reg-ugs-and-cgs\" target=\"_blank\"\u003e10000692\u003c\/a\u003e\u003cspan\u003e)* which boots the maximum output pressure to approximately 200psi.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eYou are able to order the UGS™ in two different configurations. The HPA (2.000\") configuration is designed to accept 13ci HPA tanks and 2.000\" diameter buttstocks such as the included G\u0026amp;P R3 or other 2.000\" stocks made for paintball applications such as those from MCS.\u003c\/p\u003e\n\u003cp\u003eThe CO2 configuration comes with a different rail that allows it to accept our 12g or 33g\u003cspan\u003e \u003c\/span\u003e\u003ca class=\"text-link\" title=\"CO2 Inserts\" href=\"https:\/\/polarstarairsoft.com\/collections\/air-systems\/products\/co2-inserts\"\u003eCO2 Inserts\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003ewhich makes it possible to use traditional Milspec buttstocks. Your choice of a 12g or 33g CO2 insert is included with the CO2 models. The 33g CO2 models accept threaded CO2 cartridges (p\/n \u003ca class=\"text-link\" title=\"10000332\" href=\"https:\/\/polarstarairsoft.com\/collections\/ugs-accessories\/products\/co2-cartridge-33g\" target=\"_blank\"\u003e10000332\u003c\/a\u003e) while the 12g CO2 models use the standard 12g cartridges commonly used for Airsoft and Air Guns. One can configure the same UGS for the use of either the 2.000\" HPA tanks or Milspec CO2 inserts by purchasing the different\u003cspan\u003e \u003c\/span\u003e\u003ca class=\"text-link\" title=\"UGS Stock Rails\" href=\"https:\/\/polarstarairsoft.com\/collections\/air-systems-parts-assessories\/products\/ugs-stock-rail\" target=\"_blank\"\u003eUGS Stock Rails\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eseparately. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0023\/7466\/4301\/files\/UGS_Type_2_Rifle_1200x500.jpg?v=1553528412\"\u003e\u003c\/p\u003e\n\u003cp\u003eAvailable pre-configured for either 2.000\" diameter HPA tanks or our\u003cspan\u003e \u003c\/span\u003e\u003ca class=\"text-link\" title=\"CO2 Inserts\" href=\"https:\/\/polarstarairsoft.com\/collections\/air-systems\/products\/co2-inserts\"\u003eCO2 Inserts\u003c\/a\u003e.\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003eThe\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eHPA\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003econfiguration includes G\u0026amp;P R3 buttstock pictured.\u003c\/p\u003e\n\u003cp\u003eThe\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eCO2\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003econfiguration includes your choice of 12g or 33g CO2 inserts.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003eType 1\u003c\/strong\u003e\u003cspan\u003e is designed for use with M4 series AEG receivers that accept 1-3\/16\"-16 threaded buffer tubes such as the G\u0026amp;P R3 series. This is where the buffer tube itself threads into the receiver. (Modification of the gearbox is required)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eType 2 is\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003edesigned for use with traditional TM Spec M4 series AEG receives. This is where the buffer tube slides onto a stock tail on the back of the receiver and is secured by a bolt. (Modification of the receiver and gearbox is required)\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe UGS regulator can accept up to 900psi allowing for the use of either standard output HPA tanks as well as SLP (SLP recommended).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with all standard 2.000\" diameter HPA tanks and most 2.000\" tank stocks used in paintball applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eSimple zip-tie lockout\/tournament lock.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable length of pull.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eSame internal design as the other compact PolarStar regulators (Micro Reg GEN2, CGS) with cross compatibility between parts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe UGS™ regulator uses only 2 o-rings, promoting reliability and ease of maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eNot compatible with Fusion Engine™.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cb\u003e*HPA Tank, CO2 Cartridges \u0026amp; HP Spring Not Included\u003cbr\u003e\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"container bg-dark text-light\"\u003e\n\u003ctable class=\"table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMin Output Pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e40 PSI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax Output Pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e130 PSI  (~200 PSI with HP Spring, p\/n\u003cspan\u003e \u003c\/span\u003e\u003ca class=\"text-link\" title=\"Compact Regulator High Pressure Spring\" href=\"https:\/\/polarstarairsoft.com\/collections\/air-systems-parts-assessories\/products\/high-pressure-spring-200psi-micro-reg-ugs-and-cgs\" target=\"_blank\"\u003e10000692\u003c\/a\u003e)*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax Input Pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e900 PSI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOutputs\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eInterfaces w\/ Airline (6mm OD x 4mm ID)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWarranty Information\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 Year Limited Warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003ca title=\"UGS User Manual\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0023\/7466\/4301\/files\/UGS_USER_Guide.pdf?v=1556026694\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0023\/7466\/4301\/files\/PStar_Manual_Icon_e15fe2b9-ddbe-484c-ba5c-a1a5a5d52200_100x100.png?v=1583426406\"\u003e\u003c\/a\u003e \u003cbr\u003e\u003c\/p\u003e","brand":"Hot Spot Airsoft","offers":[{"title":"Default Title","offer_id":43977623240939,"sku":"UGS Type 1","price":245.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/3154\/3208\/files\/h_ugs_1920x500_1728x_8b29510e-d62c-4311-a20b-4f814c088460.jpg?v=1685562860"},{"product_id":"novritsch-hpa-magazine-adapter-glock","title":"NOVRITSCH HPA Magazine Adapter – Glock","description":"\u003cp data-mce-fragment=\"1\"\u003eMake your secondary into a primary!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eConvert your SSP18 or other Glock GBB pistols into an HPA-powered airsoft gun and use AEG MP5 mid-caps for higher capacity.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFeatures\u003cbr data-mce-fragment=\"1\"\u003eNo cooldowns.\u003cbr data-mce-fragment=\"1\"\u003eAmbidextrous.\u003cbr data-mce-fragment=\"1\"\u003eBB latching system to prevent dropping BBs after removing the magazine. Can be released by pressing the latch.\u003cbr data-mce-fragment=\"1\"\u003eMaterial: Fiber-reinforced nylon (adapter) and zinc alloy (magazine)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eRecommended with 0,20g – 0,28g BBs and 100-120 psi air pressure.\u003cbr data-mce-fragment=\"1\"\u003eOnly use higher air pressure at your own risk!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eComes with the US connector preinstalled. If you would need the EU connector, you can get it here.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis adapter is designed for our NOVRITSCH pistols, \u003cstrong\u003ewe tested it with Elite Force\/Umarex Glock Gas Blow Back Series and it works flawlessly!\u003c\/strong\u003e \u003cbr\u003eIt might work for pistols from other brands as well, we do not take any responsibility for incompatibility issues with other brands. Only use higher air pressure at your own risk!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWarranty Note Using the HPA Magazine adapter for Hi-Capa and Glock will increase the chance of your pistol wearing down faster over time due to the higher use of the pistols. Therefore our NOVRITSCH pistols will not be covered by our warranty. Please buy at your own discretion, thank you for your understanding.\u003c\/p\u003e","brand":"NOVRITSCH","offers":[{"title":"Default Title","offer_id":44384420364523,"sku":"HPA ADAPTER GLOCK","price":84.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/3154\/3208\/files\/SSP18-1.jpg?v=1701367938"},{"product_id":"copy-of-novritsch-hpa-magazine-adapter-glock","title":"PRIMARY AIRSOFT HI-CAPA HPA\/M4 ADAPTER","description":"\u003cp data-mce-fragment=\"1\"\u003eMake your secondary into a primary!\u003c\/p\u003e\n\u003cp\u003eOur 4th generation Hi-Capa M4 adapter is injection molded from a strong glass reinforced nylon material.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe magazine release is now CNC machined aluminum for all Gen4 Primary Airsoft adapters. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis adapter allows you to use HPA (high pressure air) and M4 AEG magazines on your Hi-Capa airsoft pistol. To use it you will also need an M4 AEG magazine, “paintball” tank with low pressure regulator (0-140 psi), a hose with a Foster (polarstar) quick disconnect and of course bbs. The normal operating pressure for green gas is roughly 120 psi depending on the temperature. We recommend that you run your pistol near this pressure and do not exceed 140 psi. Keep in mind that higher pressures can cause excessive wear and damage to the internal components of your airsoft pistol.\u003c\/p\u003e\n\u003cp\u003eWe recommend that you use high quality M4 AEG magazines with strong springs for the most consistent performance.  Do not leave your magazines loaded with bbs for an extended period of time as this will cause the springs to fatigue and lose performance. Worn out AEG magazine springs should be replaced with superfeed springs. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePlease watch the installation video on YouTube titled: \u003c\/span\u003ePrimary Airsoft adapter installation tutorial HPA and M4 Glock + Hi-capa           \u003c\/p\u003e\n\u003cp\u003ehttps:\/\/youtu.be\/AydmykdSGSM\u003c\/p\u003e\n\u003cp\u003eThe adapter now comes with a longer screw which has a 2.5mm hex head. They also come with our new universal feed tube that will fit the following magazines:\u003c\/p\u003e\n\u003cp\u003eTokyo Marui Hi-capa magazines 5.1 and 4.3\u003c\/p\u003e\n\u003cp\u003eWE Tech\/Armorer Works Hi-capa magazines 5.1 ONLY \"long baseplate\"\u003c\/p\u003e\n\u003cp\u003e***(Our adapters do NOT fit WE Tech 4.3 magazines \"short baseplate\")***\u003c\/p\u003e\n\u003cp\u003eNovritsch SSP1\/KJ Works Hi-capa Magazines. \u003c\/p\u003e\n\u003cp\u003eGuarder light weight aluminum magazine bodies. \u003c\/p\u003e\n\u003cp\u003eThe metal quick disconnect fitting in the photos will come installed. The fitting is a US standard Foster Pneumatics 1\/8 NPT quick disconnect. The fitting can be changed to any fitting that has 1\/8 NPT threads. Be sure not to cross thread the fitting when installing a different one. The adapter does not come with a gun, magazine or any other accessories. \u003cspan\u003eThe included plastic spacer can be used to short stroke your slide if you want to use it. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eI designed this adapter to even the playing field when playing airsoft with a pistol as a primary against AEGs with hi-cap mags.\u003c\/p\u003e","brand":"PRIMARY ARISOFT","offers":[{"title":"Default Title","offer_id":44394949509355,"sku":"PA-W-A-M-034","price":94.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/3154\/3208\/files\/image_480x_f1229b26-bcc2-4c3a-bb86-952c9ac60b24.webp?v=1701704720"},{"product_id":"ninja-lpr-42-adjustable-regulator-copy","title":"Ninja FLEX Series PCP Adjustable Tank Regulators - 1000\/1700PSI Output!","description":"\u003ch5 class=\"font_5 wixui-rich-text__text\"\u003e\u003cspan class=\"wixui-rich-text__text\"\u003eNinja FLEX Series Regulators\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp class=\"font_8 wixui-rich-text__text\"\u003e\u003cbr class=\"wixui-rich-text__text\"\u003e\u003cspan class=\"wixui-rich-text__text\"\u003eOur all new FLEX regulator takes an old concept and makes it new again. The FLEX regulator features an \"on the fly\" adjustment to increase or decrease your regulator output pressure. This regulator system can be available in a variety of pressure ranges for both Paintball and PCP airgun use. Much like the tried and trusted PRO V2 regulators the Paintball versions of the FLEX features a 360 degree rotational collar for maximum comfort when installed on your marker. The dual gauge design allows you to quickly check both output pressure as well as remaining bottle pressure. The FLEX regulator also features the all new OFV fill valve. The new fill nipple features an O-Ring seal instead of thread sealant. This change allows the user to much more easily and quickly service the fill valve, as well as limit the chance of over tightening and shutting off airflow.\u003cbr class=\"wixui-rich-text__text\"\u003e\u003cbr class=\"wixui-rich-text__text\"\u003eThe Ninja FLEX regulator has been awarded patent number.: US 11,169,550 B2\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe Flex Adjustable Pressure  Air Tank Regulator lets you set the output pressure by turning the adjustable nut directly on the regulator from  1000psi to 1700psi.\u003cbr\u003ePerfect for these who want extra power with our PCP\/HPA Custom Home Defense Guns Series! \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDISCLAIMER: We do not recommend to go more than 1300PSI) \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe secondary output pressure gauge gives you the readout of the adjusted pressure. The Flex Regulator controls the air coming from your air tank, steadying the pressure before the air enters your paintball marker. The constant output of air pressure helps to improve the performance of your paintball gun, enhancing accuracy.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"HotSpotAirsoft","offers":[{"title":"Default Title","offer_id":45782547693803,"sku":"RFLEXREG3K","price":149.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/3154\/3208\/files\/FLEX_cbf4db0c-cefb-4c77-9b19-64bf55a104b9.jpg?v=1725553054"},{"product_id":"hsa-remote-line-direct-kit-designed-for-all-t4e-home-defense-line-for-hpa-88-90g-with-slide-check-copy","title":"HSA HPA \/ PCP COMPLETE KIT - CONVERT YOUR T4E HDX MAXIMUS 88-90G CO2 VERSION TO PCP SYSTEM!","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDescription:\u003c\/strong\u003e \u003cbr\u003e\u003cbr\u003eSpecifically Designed to convert your HDX MAXIMUS 88g Version  TO A PCP SYSTEM!\u003cbr\u003e\u003cbr\u003eThis Complete Kit will allow you to use \u003cstrong\u003eboth\u003c\/strong\u003e, the 88g Co2 system you already have AND a PCP System which will be more stable, specially in the winter.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0); text-decoration: underline;\"\u003eKIT ONLY, LAUNCHER NOT INCLUDED\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCOMPATIBLE WITH T4E HDX \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eOur Kit Includes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCo2 to HPA Adapter\u003c\/li\u003e\n\u003cli\u003eHPA On \/ OFF Valve\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e13CI 3000psi PCP Thank with 1100psi output (Recommended) \u003c\/li\u003e\n\u003cli\u003eAdjustable Carbine Stock \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HotSpotAirsoft","offers":[{"title":"Default Title","offer_id":45984081969387,"sku":"HSA-PCP-HDX88-KIT","price":219.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/3154\/3208\/files\/HDX-PCP-KIT.jpg?v=1732289473"},{"product_id":"hsa-hpa-to-88g-co2-complete-kit-convert-hpa-guns-to-88-90g-co2-system","title":"HSA HPA to 88g Co2 COMPLETE KIT - CONVERT HPA GUNS TO 88-90G CO2 SYSTEM!","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDescription:\u003c\/strong\u003e \u003cbr\u003e\u003cbr\u003eSpecifically Designed to convert your HDX MAXIMUS or any of our T4E Custom Home Defense HPA Version TO a 88g Co2  SYSTEM!\u003cbr\u003e\u003cbr\u003eThis Complete Kit will allow you to use \u003cstrong\u003eboth\u003c\/strong\u003e, the HPA system you already have AND a 88g Co2 System \u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: rgb(255, 42, 0); text-decoration: underline;\"\u003e\u003cspan style=\"text-decoration-line: underline; color: #ff2a00;\"\u003e\u003cb\u003eKIT ONLY, \u003c\/b\u003e\u003c\/span\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cb\u003e\u003cu\u003eLAUNCHER\u003c\/u\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan style=\"text-decoration-line: underline; color: #ff2a00;\"\u003e\u003cb\u003e NOT INCLUDED\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eOur Kit Includes:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHPA to 88g Co2 Adapter\u003c\/li\u003e\n\u003cli\u003e88g Co2 On \/ OFF Valve\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAdjustable Carbine Stock For 88g\/90g Co2 Cylinders.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HotSpotAirsoft","offers":[{"title":"Default Title","offer_id":46566133596395,"sku":"HPA-TO-88G-KIT","price":109.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/3154\/3208\/files\/IMG_3035.jpg?v=1765736807"},{"product_id":"new-exclusive-hsa-13ci-hpa-tank-free-floating-adjustable-stock","title":"NEW! HSA AR STYLE STOCK FOR 13ci OR ANY 2\" DIAMETER HPA TANK - TOOLLESS ADJUSTABLE FREE FLOATING!","description":"\u003cul class=\"a-unordered-list a-vertical a-spacing-mini\"\u003e\n\u003cli style=\"list-style-type: none;\" class=\"a-spacing-mini\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eKey features and benefits!\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cbr\u003e\n\u003cul data-processed=\"true\" class=\"KsbFXc U6u95\"\u003e\n\u003cli data-processed=\"true\" data-hveid=\"CAMQAA\"\u003e\u003cspan data-processed=\"true\" data-sfc-cp=\"\" class=\"T286Pc\"\u003e\u003cstrong data-processed=\"true\" class=\"Yjhzub\"\u003e3D Printed with Strong PETG Filament\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-processed=\"true\" data-hveid=\"CAMQAA\"\u003e\u003cspan data-processed=\"true\" data-sfc-cp=\"\" class=\"T286Pc\"\u003e\u003cstrong data-processed=\"true\" class=\"Yjhzub\"\u003eNO TOOLS NEEDED TO ADJUST\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-processed=\"true\" data-hveid=\"CAMQAA\"\u003e\u003cspan data-processed=\"true\" data-sfc-cp=\"\" class=\"T286Pc\"\u003e\u003cstrong data-processed=\"true\" class=\"Yjhzub\"\u003eCompatible With\u003c\/strong\u003e: any air tank with \u003cstrong\u003e2 Inch Diameter\u003c\/strong\u003e (e.g., 13ci, 15ci, 17ci) directly, eliminating the need for external hoses or a guide rod.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-processed=\"true\" data-hveid=\"CAMQAQ\"\u003e\u003cspan data-processed=\"true\" data-sfc-cp=\"\" class=\"T286Pc\"\u003e\u003cstrong data-processed=\"true\" class=\"Yjhzub\"\u003eCollapsible and adjustable\u003c\/strong\u003e: The stock is adjustable, allowing for a comfortable and secure fit, while its collapsible design is similar to modern military stocks.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-processed=\"true\" data-hveid=\"CAMQAg\"\u003e\u003cspan data-processed=\"true\" data-sfc-cp=\"\" class=\"T286Pc\"\u003e\u003cstrong data-processed=\"true\" class=\"Yjhzub\"\u003eErgonomic and low-profile\u003c\/strong\u003e: It provides a comfortable grip and shooting position, with a low-profile adjustment for a secure fit.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-processed=\"true\" data-hveid=\"CAMQAw\"\u003e\u003cspan data-processed=\"true\" data-sfc-cp=\"\" class=\"T286Pc\"\u003e\u003cstrong data-processed=\"true\" class=\"Yjhzub\"\u003eZero wobble design\u003c\/strong\u003e: Built with reinforced polymer, it's designed for a tight, snug fit with almost no wobble, which increases accuracy\u003cspan data-processed=\"true\" id=\"iNOYxaabBINrJptQPrq2Y2A4_1\"\u003e.\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan data-processed=\"true\" id=\"iNOYxaabBINrJptQPrq2Y2A4_2\"\u003e\u003cspan data-sfc-cp=\"\" class=\"T286Pc\"\u003e\u003cstrong class=\"Yjhzub\"\u003eProtection\u003c\/strong\u003e: It protects the integrated air tank from damage.\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan data-processed=\"true\" id=\"iNOYxaabBINrJptQPrq2Y2A4_2\"\u003e\u003cspan data-sfc-cp=\"\" class=\"T286Pc\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e*TANK NOT INCLUDED\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003ePackage include:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003e1 HSA 3D PRINTED 13CI HPA TANK FREE FLOATING ADJUSTABLE STOCK\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hot Spot Airsoft","offers":[{"title":"Default Title","offer_id":47155829866731,"sku":"HSA-13CI-STOCK","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/3154\/3208\/files\/IMG_3344.jpg?v=1768491514"},{"product_id":"new-hsa-toolless-adjustable-free-floating","title":"NEW! HSA TOOLLESS ADJUSTABLE FREE FLOATING CARBINE STOCK FOR 88g CO2 !","description":"\u003cul class=\"a-unordered-list a-vertical a-spacing-mini\"\u003e\n\u003cli class=\"a-spacing-mini\" style=\"list-style-type: none;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eKey features and benefits!\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cbr\u003e\n\u003cul class=\"KsbFXc U6u95\" data-processed=\"true\"\u003e\n\u003cli data-hveid=\"CAMQAA\" data-processed=\"true\"\u003e\u003cspan class=\"T286Pc\" data-sfc-cp=\"\" data-processed=\"true\"\u003e\u003cstrong class=\"Yjhzub\" data-processed=\"true\"\u003e3D Printed with Strong PETG Filament\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-hveid=\"CAMQAA\" data-processed=\"true\"\u003e\u003cspan class=\"T286Pc\" data-sfc-cp=\"\" data-processed=\"true\"\u003e\u003cstrong class=\"Yjhzub\" data-processed=\"true\"\u003eNO TOOLS NEEDED TO ADJUST\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-hveid=\"CAMQAA\" data-processed=\"true\"\u003e\u003cspan class=\"T286Pc\" data-sfc-cp=\"\" data-processed=\"true\"\u003e\u003cstrong class=\"Yjhzub\" data-processed=\"true\"\u003eCompatible With\u003c\/strong\u003e: 88G \/ 90G Co2 Cartridge.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-hveid=\"CAMQAQ\" data-processed=\"true\"\u003e\u003cspan class=\"T286Pc\" data-sfc-cp=\"\" data-processed=\"true\"\u003e\u003cstrong class=\"Yjhzub\" data-processed=\"true\"\u003eCollapsible and adjustable\u003c\/strong\u003e: The stock is adjustable, allowing for a comfortable and secure fit, while its collapsible design is similar to modern military stocks.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-hveid=\"CAMQAg\" data-processed=\"true\"\u003e\u003cspan class=\"T286Pc\" data-sfc-cp=\"\" data-processed=\"true\"\u003e\u003cstrong class=\"Yjhzub\" data-processed=\"true\"\u003eErgonomic and low-profile\u003c\/strong\u003e: It provides a comfortable grip and shooting position, with a low-profile adjustment for a secure fit.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-hveid=\"CAMQAw\" data-processed=\"true\"\u003e\u003cspan class=\"T286Pc\" data-sfc-cp=\"\" data-processed=\"true\"\u003e\u003cstrong class=\"Yjhzub\" data-processed=\"true\"\u003eZero wobble design\u003c\/strong\u003e: designed for a tight, snug fit with almost no wobble, for increased accuracy\u003cspan id=\"iNOYxaabBINrJptQPrq2Y2A4_1\" data-processed=\"true\"\u003e.\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan id=\"iNOYxaabBINrJptQPrq2Y2A4_2\" data-processed=\"true\"\u003e\u003cspan class=\"T286Pc\" data-sfc-cp=\"\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan id=\"iNOYxaabBINrJptQPrq2Y2A4_2\" data-processed=\"true\"\u003e\u003cspan class=\"T286Pc\" data-sfc-cp=\"\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e*Co2 NOT INCLUDED\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003ePackage include:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003e1 HSA 3D PRINTED 88g \/ 90g FREE FLOATING ADJUSTABLE STOCK\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hot Spot Airsoft","offers":[{"title":"Default Title","offer_id":47815145062635,"sku":"HSA-88G-STOCK","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/3154\/3208\/files\/IMG_3384.jpg?v=1771192262"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/3154\/3208\/collections\/pstar.jpg?v=1620669430","url":"https:\/\/www.hotspotairsoft.com\/collections\/hpa-conversion-kits\/hpa-hi-capa-5-1.oembed","provider":"Hot Spot Airsoft","version":"1.0","type":"link"}